Shower Sticker - Crazy Banana Frosted

This product will be custom made and shipped for you within 7 to 10 business days.

Number of stickers per box: 1 piece

Our vinyl is easy to apply and long lasting, leaving absolutely no damage or residue when removed.

Before you start:

• For optimal results, make sure the surface is free of dust and grease before applying. You can do this by first using an alcoholic cleaning solution on the surface, followed by a dishwashing liquid to remove the alcohol or any residual oil residue.
• Wandd cannot be held responsible for surface preparation.
• We recommend that at least two people are involved in the installation of this product.
• We recommend that you get professional help with the installation to ensure a perfect end result. Need help? Then use our assembly service.

Installation manual:

• Our shower vinyl decals must be applied wet. This allows you to position the sticker properly, push out any air bubbles and prevent creases in the vinyl. All you need is 5 ml of dish soap to 5 liters of water in a spray bottle.
• Once your surface is prepared and clean, start at the top and peel the backing paper off the vinyl. Carefully place it on a flat surface with the right side down.
• Using a spray bottle, apply the soap solution liberally to both the glass surface and the back of the vinyl. Make sure that both surfaces are thoroughly wet so that you have time to position the foil properly before it sticks properly.
• Place the decal in place starting from the top down.
• When you're happy with the position, spray another coat of soapy water over the film, then use a water squeegee or window cleaner (anything with a rubber rim) to push the water out from behind the film and make sure no air bubbles form.
• Work from top to bottom and center out for best results.
• Repeat this process at least three times to ensure all water has been properly pushed out from behind the vinyl.
• Use a pin to prick and rub out any air bubbles.
• Once all the water has been removed from behind the decal, use a heat gun to seal the edges and corners. If you don't have a heat gun, you can also use a hair dryer. This will prevent the vinyl from peeling off later.

• Once your edges are down and secure, use an NT cutter to cut away any excess vinyl.

Et voila! The installation of your shower sticker is complete.

This is how the shower sticker lasts longer:

• While vinyl is suitable for use in the bathroom, make sure that this surface is not exposed to water repeatedly. By this we mainly mean: direct contact with water, for example by putting the jet of the shower head on it.
• Dry with a soft, dry cloth if wet.
• Keep the area dry and use a soft damp cloth to wipe clean.
• Prolonged exposure to the sun can also cause vinyl to decompose over time.
• Do not hang towels or other objects over the shower vinyl as this can cause faster wear.